08/06/89: RE: 4 IN ONE BOARD Re: Msg 52298 by Delphi, | Category: Delphi - Hardware Hacking | 2 comments - (Comments are closed)

RE: 4 IN ONE BOARD Re: Msg 52298

52694 6AUG89-0907 Hardware Hacking
RE: 4 IN ONE BOARD (Re: Msg 52298)
From: DISTO To: SKYLINE

Skyline,
Before you send it back, do a few tests,

1 Is the power connected right (polarity).
2 Is the board connected properly.
3 What software are you using to test the board?

The jumpers and wires are because of board errors, and will vanish as soon
as the next batch of boards are produced. All 4in1 boards are tested before
leaving CRC. If you still haven’t got it to work, call CRC and they’l inform
you on what to do next. -Tony.

2 comments to RE: 4 IN ONE BOARD Re: Msg 52298

  • pucc_unknown

    52718 6AUG89-2208 Hardware Hacking
    RE: 4 IN ONE BOARD (Re: Msg 52694)
    From: SKYLINE To: DISTO

    HI TONY..
    I’VE TRIED ALL YOUR SUGGESTIONS WITH NO LUCK.. THE BOARD IS STILL DEAD. I’M
    USING THE RADIO SHACK POWER SUPPLY AND IT’S TESTED OUT FINE FOR POLARITY AND
    VOLTAGES.
    THE BOARD WAS CONNECTED TO ALL 3 CONNECTING POINTS AS PER YOUR MANUAL. WHILE
    THE BOARD IS IN PLACE, THE CONTROLLER WORKS NORMALLY EXCEPT THAT IT DOESN’T SEE
    THE 4-IN-1 BOARD AS BEING PRESENT. I’VE USED THE OS-9 SOFTWARE ON THE SUPPLIED
    DISKS FOR THE ACCES
    S TO THE BOARD’S FUNCTIONS. THE SOFTWARE EXECUTES BUT RETURNS NOTHING.. I’VE
    BOUGHT 3 CONTROLLER RELATED PRODUCTS PRODUCED BY CRC IN THE PAST FEW MONTHS AND
    ALL BUT THIS ONE WORKED PERFECTLY. I GUESS ONE MAY SLIP THRU OR GO BAD IN THE
    SHIPPING PROCESS SONN
    ONER OR LATER..
    ANYWAY, THANX FOR THE FINE PRODUCTS AND SOFTWARE AND I’LL RETURN THE BOARD FOR
    EVALUATION TO CRC.
    SKYLINE

  • pucc_unknown

    52817 10AUG89-2102 Hardware Hacking
    RE: 4 IN ONE BOARD (Re: Msg 52718)
    From: DISTO To: SKYLINE

    Okay, I’ll see to it that you get it (or another) back ASAP. -Tony