07/26/94: MM/1 Sound cable by Delphi, | Category: Delphi - OSK Applications | 11 comments - (Comments are closed)

MM/1 Sound cable

88847 26-JUL 22:53 OSK Applications
MM/1 Sound cable
From: NIMITZ To: ALL

I’m looking for someone who can tell me how the MM/1 5pin DIN to RCA
sound cable is wired. Does the ground pin have to be connected to
each sound wire? Where can the prewired ones be purchased?

Thanks!

11 comments to MM/1 Sound cable

  • pucc_unknown

    88849 26-JUL 23:21 OSK Applications
    RE: MM/1 Sound cable (Re: Msg 88847)
    From: COLORSYSTEMS To: NIMITZ

    > I’m looking for someone who can tell me how the MM/1 5pin DIN to RCA
    > sound cable is wired. Does the ground pin have to be connected to
    > each sound wire? Where can the prewired ones be purchased?

    The cable is wired thussly:

    5 pin din MM1 stereo sound connector as seen looking at the back panel
    of the MM1

    3 o 1 o

    5 o 4 o

    2 o

    1 – Right Channel Input
    2 – Ground
    3 – Left Channel Input
    4 – Right Channel Output
    5 – Left Channel Output

    I was told several times that Rat Shack sold these cables, but by the time
    I went to one and asked (at least a year ago), that particular stock number
    had been retired.

    ————————————
    Zack C Sessions

    If you’re not the “lead dog”, the scenery never changes.

  • pucc_unknown

    88852 27-JUL 01:02 OSK Applications
    RE: MM/1 Sound cable (Re: Msg 88849)
    From: MITHELEN To: COLORSYSTEMS

    Chris Hawks (HAWKSOFT) hand a number of these cables at one time and
    was selling them at a good price… I Don’t know who his supplier was
    though. I have seen them at other electronics stores, listed as European
    to RCA sterio cables…

    Paul

  • pucc_unknown

    88854 27-JUL 01:14 OSK Applications
    RE: MM/1 Sound cable (Re: Msg 88849)
    From: NIMITZ To: COLORSYSTEMS

    Thanks, Zack. To you and John Baer who called me with the same diagram!

    I really appreciate the fast help here!

  • pucc_unknown

    88864 27-JUL 19:21 OSK Applications
    RE: MM/1 Sound cable (Re: Msg 88854)
    From: JOHNREED To: NIMITZ

    David,
    I see you got lots of replies and a diagram for the DIN stereo
    plug. I didn’t see an answer to the other question — YES,
    the ground goes to the outer (shell) terminal on EACH RCA-type
    plug. I had a couple of those adaptors once — came with a
    stereo system I bought while stationed in Berlin. Think I
    can find them now? (Fat chance).
    ********************************
    A stitch in time ——————–
    —— is worth two in the bush

    John R. Wainwright < > < >

  • pucc_unknown

    88866 27-JUL 19:53 OSK Applications
    RE: MM/1 Sound cable (Re: Msg 88854)
    From: COLORSYSTEMS To: NIMITZ

    > Thanks, Zack. To you and John Baer who called me with the same diagram!
    >
    > I really appreciate the fast help here!

    No prob. btw, on my MM/1a, I made my own 5pin DIN to two sets of RCA phono
    jacks which I mounted in a blank back plate which I had drilled four
    holes in.

    ————————————
    Zack C Sessions

    If you’re not the “lead dog”, the scenery never changes.

  • pucc_unknown

    88898 28-JUL 20:07 OSK Applications
    RE: MM/1 Sound cable (Re: Msg 88854)
    From: JOHNBAER To: NIMITZ

    Anytime David.. glad to give back some help.


    John -

    < Posted with Ved 2.3.1 & IX 1.2.0 >

  • pucc_unknown

    88873 27-JUL 22:39 OSK Applications
    RE: MM/1 Sound cable (Re: Msg 88852)
    From: WA2EGP To: MITHELEN

    Some “stereo” stores carry this cable. I got mine that way (sorry Radio
    Shaft)

  • pucc_unknown

    88929 30-JUL 10:12 OSK Applications
    RE: MM/1 Sound cable (Re: Msg 88864)
    From: NIMITZ To: JOHNREED

    Thanks, John. I need all the help I can get!

    David

  • pucc_unknown

    88930 30-JUL 10:13 OSK Applications
    RE: MM/1 Sound cable (Re: Msg 88866)
    From: NIMITZ To: COLORSYSTEMS (NR)

    I plan to mount RCA jacks on the back panel of all new MM/1′s after I get
    the new boards. Called to order boards last week and the company had ‘lost’
    my file and the quote was ‘for double sided boards not 4 layerr boards’. So
    this may take awhile longer yet :(

    David

  • pucc_unknown

    88972 31-JUL 21:46 OSK Applications
    RE: MM/1 Sound cable (Re: Msg 88929)
    From: HAWKSOFT To: NIMITZ (NR)

    Hi David!

    I got my sound cables from a TV repair supply house. It is a standard
    part for connecting European audio equipment to US equipment. Manufactured
    (or packaged anway) by GC Electronics. If you don’t see ‘em at your local
    TV repair shop ask to see the GC Electonics catalog.

    Chris

    :-> :-> :-> :-> :-> :-> :-> Chris “HAWKSoft” < -: <-: <-: <-: <-: <-: <-:

    Delphi: HAWKSOFT Internet: HAWKSOFT [at] DELPHI [dot] COM

    ******************< Uploaded w/ InfoXpress vr. 1.01.00 >******************

  • pucc_unknown

    89049 3-AUG 19:01 OSK Applications
    RE: MM/1 Sound cable (Re: Msg 88972)
    From: NIMITZ To: HAWKSOFT

    Thanks Chris. I need all the pointers I can get. Say, can I get your catalog
    in electronic form? Same goes for all vendors out there! I need to get a
    sourcebook going!

    David